Using PBCLONE Library

 BBS: Inland Empire Archive
Date: 04-14-92 (17:39)             Number: 140
From: ZACK JONES                   Refer#: NONE
  To: MARK BUTLER                   Recvd: NO  
Subj: Using PBCLONE Library          Conf: (2) Quik_Bas

 >  PBClone v1.7 is too big *if* you don't use the segments /SE:
 > switch and
 >  set it to around 512 like so....

 >  LINK/Q/SE:512 PBCLONE.LIB,PBCLONE.QLB,,BQLB45;
 >         ^^^^^^
 >            |
 >            `----- I did this and it compiled ok.

Not only did I have to use the SE:512 I had to boot from a
floppy so I wouldn't have any TSR's loaded before I could
create a .QLB file.  It took a little effort, but I think
it'll be worth it!

Take Care,
Zack Jones

---
 * Origin: Zack's Shack (1:387/905.1)